You are a consumer? Customize your experience.

The Master Group sells only in the provinces of Ontario, Quebec and the Maritimes.

Duct Diffusers

See Fabricair Duct Diffusers
Duct Diffusers Fabricair
Fabric Systems Combi 20, Combi 60, Combi 70, Combi 80, Combi 85, Combi 90 Fabricair

Fabric Systems
Combi 20, Combi 60, Combi 70, Combi 80, Combi 85, Combi 90

 Share 
Add to favorites Remove from my favorites

Flow Modèles


NozzFlow™
 

NozzFlow™ disperses the air by means of a row of nozzles that helps provide a very stable directional flow from the duct. The nozzles ensure a high level of comfort by evenly distributing the air along the entire length of the duct. The nozzles ensure that the air discharge the duct perpendicularly. NozzFlow™ is well suited for dispersing cold and hot air with an air throw ranging from medium to very long.

 

Features:

Flow Principle: Mixing Ventilation
Condition of suppl. air: Cold and hot air
Exit Velocity: 7-20 m/s [1,400-4,000 fpm]
Throw type: High

See picture

The nozzles can be placed anywhere needed on the duct surface so that conditioned air easily can be directed to where it is needed.

 

NC Level / Design pressure

 

ΔP [INWG]  

0,24

0,32

0,40

0,48

0,56

0,64

0,72

0,80

Fabric:

ΔP [PA]  

60

80

100

120

140

160

180

200

FabricAir® Combi 20

 

20

20

25

25

30

30

35

35

FabricAir® Combi 60

 

20

20

25

25

30

30

35

35

FabricAir® Combi 70

 

20

20

25

25

30

30

35

35

FabricAir® Combi 80

 

20

20

25

25

30

30

35

35

FabricAir® Combi 85*

 

20

25

25

30

30

30

35

35

FabricAir® Combi 90*

 

20

25

25

30

30

30

35

35

* = Non permeable


PerfoFlow™

 

In PerfoFlow™, the air exits the duct surface through a number of small holes scattered on an area of the duct’s circumference ensuring low exit velocity. This flow model disperses the air slightly more than FabFlow™. The air flow is primarily controlled by thermodynamic forces.

 

Features:

Flow Principle: Displacement-/mixing ventilation
Condition of suppl. air: Isothermal and limited heating
Exit Velocity: 7-13 m/s [1,400-2,600 fpm]
Throw type: Medium

See picture

NC Level / Design pressure

 

ΔP [INWG]  

0,24

0,32

0,40

0,48

0,56

0,64

0,72

0,80

Fabric:

ΔP [PA]  

60

80

100

120

140

160

180

200

FabricAir® Combi 85*

 

25

30

30

30

35

35

40

40

FabricAir® Combi 90*

 

25

30

30

30

35

35

40

40

* = Non permeable


MeshFlow™


The air supplied from this flow model leaves the duct through a lengthwise mesh. Increasing the air velocity through the mesh creates a pulsating effect that throws the air and mixes it with the air in the room. The primary driving force of this flow model is the pulsation of air through the mesh.

 

Features:

Flow Principle: Displacement-/mixing ventilation
Condition of suppl. air: Cold and hot air
Exit Velocity: 0,9-2,5 m/s [200 to 500 fpm]
Throw type: Medium

See picture

NC Level / Design pressure

 

ΔP [INWG]  

0,24

0,32

0,40

0,48

0,56

0,64

0,72

0,80

Fabric:

ΔP [PA]  

60

80

100

120

140

160

180

200

FabricAir® Combi 20

 

20

25

25

30

30

35

35

40

FabricAir® Combi 60

 

20

25

25

30

30

35

35

40

FabricAir® Combi 70

 

20

25

25

30

30

35

35

40

FabricAir® Combi 80

 

20

25

25

30

30

35

35

40

FabricAir® Combi 85*

 

20

25

25

30

30

35

35

40

FabricAir® Combi 90*

 

20

25

25

30

30

35

35

40

* = Non permeable


SonicFlow™

 

In SonicFlow™, the air is distributed through small holes in the fabric. They are placed in bands of up to 5 lengthwise rows. The flow is controlled by the static pressure and resulting velocity of the air exiting the duct.

 

Features:

Flow Principle: Mixing Ventilation
Condition of suppl. air: Isothermal and limited heating
Exit Velocity: 7-13 m/s [1 400-2 600 fpm]
Throw type: Medium

See picture

NC Level / Design pressure

 

ΔP [INWG]  

0,24

0,32

0,40

0,48

0,56

0,64

0,72

0,80

Fabric:

ΔP [PA]  

60

80

100

120

140

160

180

200

FabricAir® Combi 85*

 

25

30

30

30

35

35

40

40

FabricAir® Combi 90*

 

25

30

30

30

35

35

40

40

* = Non permeable


OriFlow™


In OriFlow™, the air exits the duct through large holes in the fabric. OriFlow™ is only for distributing large air volumes of air using a long air throw.

 

Features:

Flow Principle: Mixing Ventilation
Condition of suppl. air: Isothermal and limited heating
Exit Velocity: 10-18 m/s [2 000-3 600 fpm]
Throw type: Only large air volumes

See picture

NC Level / Design pressure

 

ΔP [INWG]  

0,24

0,32

0,40

0,48

0,56

0,64

0,72

0,80

Fabric:

ΔP [PA]  

60

80

100

120

140

160

180

200

FabricAir® Combi 85*

 

20

25

25

25

30

30

35

35

FabricAir® Combi 90*

 

20

25

25

25

30

30

35

35

* = Non permeable

 

Features

FabricAir® Combi is available with both permeable and non-permeable fabric. The fabric is strong and durable – it comes with a 10 year warranty (FabricAir® Combi 20 is 5 year). FabricAir® Combi is Oeko-Tex certified. All suspension types can be used, including All-in-One, which always keeps the duct stretched out even when the air is removed from the system.

FabricAir® Combi is machine washable and retains its dimensions after washing (max. 0.5% shrinkage). The permeability is uniform (max. 5% variation). The fabric is supplied in nine standard colors and can be dyed in special colors. FabricAir® Combi 80 and Combi 90 are supplied with a specially developed antimicrobial treatment, which is especially suited for areas with strict hygiene requirements.

Technical Documents   Hide DocumentsView Documents

Similar products

Product(s) in the same category